[PATCH 2/4] ARM: dts: da850: Add an aemif node
From: Karl Beldan <hidden>
Date: 2016-08-09 17:15:27
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Currently the davinci da8xx boards use the mach-davinci aemif code. Instantiating an aemif node into the DT allows to use the ti-aemif memory driver and is another step to better DT support. Also it will allow to properly pass the emif timings via DT. Signed-off-by: Karl Beldan <redacted> --- arch/arm/boot/dts/da850.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index bc10e7e..f62928c 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi@@ -411,6 +411,16 @@ dma-names = "tx", "rx"; }; }; + aemif: aemif@68000000 { + compatible = "ti,da850-aemif"; + #address-cells = <2>; + #size-cells = <1>; + + reg = <0x68000000 0x00008000>; + ranges = <0 0 0x60000000 0x08000000 + 1 0 0x68000000 0x00008000>; + status = "disabled"; + }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; reg = <0x62000000 0x807ff
--
2.9.2