Re: [PATCH v2 2/2] ARM: dts: imx53: add support for USB armory board

One more comment below.

On Tue, Jun 28, 2016 at 02:54:44PM +0200, andrej-6l9oX9VzF44FueaiHvvTSg@public.gmane.org wrote:

+&iomuxc {
+	pinctrl_esdhc1: esdhc1grp {
+		fsl,pins = <
+			MX53_PAD_SD1_DATA0__ESDHC1_DAT0		0x1d5
+			MX53_PAD_SD1_DATA1__ESDHC1_DAT1		0x1d5
+			MX53_PAD_SD1_DATA2__ESDHC1_DAT2		0x1d5
+			MX53_PAD_SD1_DATA3__ESDHC1_DAT3		0x1d5
+			MX53_PAD_SD1_CMD__ESDHC1_CMD		0x1d5
+			MX53_PAD_SD1_CLK__ESDHC1_CLK		0x1d5
+		>;
+	};
+
+	pinctrl_i2c1_pmic: i2c1grp_pmic {
+		fsl,pins = <
+			MX53_PAD_EIM_D21__I2C1_SCL	0x0
+			MX53_PAD_EIM_D28__I2C1_SDA	0x0

Please use a proper pin configuration value rather than 0x0.

+		>;
+	};
+
+	pinctrl_led: led {
+		fsl,pins = <
+			MX53_PAD_DISP0_DAT6__GPIO4_27 0x0

Ditto.

Shawn

+		>;
+	};

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html