Re: [PATCH] scripts/dtc: dt_to_config, use full path for dtx_diff

On Mon, Jul 18, 2016 at 8:00 PM, Gaurav Minocha
[off-list ref] wrote:

On Mon, Jul 18, 2016 at 7:40 PM, Rob Herring [off-list ref] wrote:

quoted

On Mon, Jul 18, 2016 at 6:12 PM, Frank Rowand [off-list ref] wrote:

quoted

On 07/18/16 15:18, Rob Herring wrote:

quoted

On Fri, Jun 24, 2016 at 7:56 PM, Frank Rowand [off-list ref] wrote:

quoted

From: Frank Rowand <redacted>

Do not require dtx_diff to be in $PATH.

dt_to_config already needs to be run from the root directory of a kernel
tree so use scripts/dtc/dtx_diff instead of dtx_diff.

Okay, now I get a bit further. I get this message even if I set my
.config file on the command line:

grep: ./.config: No such file or directory

All of the following work for me:

  scripts/dtc/dt_to_config --config .config arch/arm/boot/dts/highbank.dts

  scripts/dtc/dt_to_config --config=.config arch/arm/boot/dts/highbank.dts

  scripts/dtc/dt_to_config --config ./.config arch/arm/boot/dts/highbank.dts

  scripts/dtc/dt_to_config --config=./.config arch/arm/boot/dts/highbank.dts

What is the exact command line you are using?

scripts/dtc/dt_to_config -c .build-arm/.config --config-format
arch/arm/boot/dts/highbank.dts

Above command works for me.

My bad, cleaned my local repo. Now, I can see this error. Will get back!

quoted

quoted

Just to confirm, you are in the root directory of the kernel source tree
and your .config is in the same directory (since you specified "./.config").

I'm in the root, but .config is not.

Rob

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html