Re: [PATCH 05/15] ARM: dts: sun5i: reference-design-tablet: Remove mention of q8

Hi,

On 09-07-16 05:53, Chen-Yu Tsai wrote:

On Sat, Jul 9, 2016 at 12:05 AM, Hans de Goede [off-list ref] wrote:

quoted

Remove all mention of q8 from sun5i-reference-design-tablet.dtsi.

Signed-off-by: Hans de Goede <redacted>
---
 arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
index e78452c..20cc940 100644
--- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi

@@ -98,7 +98,7 @@

 &mmc0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8>;
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
        vmmc-supply = <&reg_vcc3v0>;
        bus-width = <4>;
        cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */

@@ -118,7 +118,7 @@
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };

-       mmc0_cd_pin_q8: mmc0_cd_pin@0 {
+       mmc0_cd_pin: mmc0_cd_pin@0 {

We could name this mmc0_cd_pin_reference_design and put it in
sun5i-a13.dtsi. We already do this for A10/A20.

I would prefer to keep this this way, I was never really fond
of the A10/A20 solution, in retrospect we should have done
a sun4i-a10-reference-design.dtsi defining a lot more stuff
then just the cd_pin.

This works equally well though.

Acked-by: Chen-Yu Tsai <redacted>

Thanks.

Regards,

Hans

quoted

                allwinner,pins = "PG0";
                allwinner,function = "gpio_in";
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
--
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html