[PATCH 7/9] ARM: dts: sun7i: bananapi-m1-plus: red LED is power LED
From: Chen-Yu Tsai <hidden>
Date: 2016-07-06 09:10:48
Also in:
linux-arm-kernel
Subsystem:
the rest · Maintainer:
Linus Torvalds
The red led on the Bananapi M1+ is wired to light up as soon as the board is powered, and continues to be lit while the GPIO is floating. Rename the LED to "pwr", remove the default trigger, and mark it as default on. Also fix the pinmux node that was specifying a different pin for this LED. Signed-off-by: Chen-Yu Tsai <redacted> --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
index 14fb463758e4..ba5bca0fe997 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts@@ -70,12 +70,11 @@ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; - red { - label = "bananapi-m1-plus:red:usr"; + pwr { + label = "bananapi-m1-plus:pwr:usr"; gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "default-on"; + default-state = "on"; }; - }; mmc3_pwrseq: mmc3_pwrseq {
@@ -202,7 +201,7 @@ }; led_pins_bpi_m1p: led_pins@0 { - allwinner,pins = "PH24", "PG2"; + allwinner,pins = "PH24", "PH25"; allwinner,function = "gpio_out"; allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
--
2.8.1