Thread (1 message) 1 message, 1 author, 2016-07-28

Re: [PATCH 18/18] ARM: mvebu: a395-gp: add support for the Armada 395 GP Board

From: Gregory CLEMENT <hidden>
Date: 2016-07-28 13:15:55
Also in: linux-arm-kernel, lkml

Hi Grzegorz,
 
 On jeu., juil. 21 2016, Grzegorz Jaszczyk [off-list ref] wrote:

Change the prefix to "ARM: dts: mvebu: armada-395-gp:"
This commit adds description for the following features for this board:

- Serial port
- PCIe interfaces
- USB2.0
- USB3.0
- SDIO
- 1024 MiB NAND-FLASH
- SATA
- I2C buses

Signed-off-by: Grzegorz Jaszczyk <redacted>
[...]

As for the other board, try to add information about the connector used:
+			serial@12000 {
Here,
+				status = "okay";
+			};
+
+			usb@58000 {
here
+				status = "okay";
+			};
+
+			sata@a8000 {
here
+				status = "okay";
+			};
+
+			flash@d0000 {
+				status = "okay";
+				pinctrl-0 = <&nand_pins>;
+				pinctrl-names = "default";
+				num-cs = <1>;
+				marvell,nand-keep-config;
+				marvell,nand-enable-arbiter;
+				nand-on-flash-bbt;
+				nand-ecc-strength = <4>;
+				nand-ecc-step-size = <512>;
+
+				partitions {
+					compatible = "fixed-partitions";
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					partition@0 {
+						label = "U-Boot";
+						reg = <0x00000000 0x00600000>;
+						read-only;
+					};
+
+					partition@800000 {
+						label = "uImage";
+						reg = <0x00600000 0x00400000>;
+						read-only;
+					};
+
+					partition@1000000 {
+						label = "Root";
+						reg = <0x00a00000 0x3f600000>;
+					};
+				};
+			};
+
+			sdhci@d8000 {
here
+				clock-frequency = <200000000>;
+				broken-cd;
+				wp-inverted;
+				bus-width = <8>;
+				status = "okay";
+				no-1-8-v;
+			};
+
+			usb3@f0000 {
here
+				status = "okay";
+			};
+		};
+
+		pcie-controller {
+			status = "okay";
+
+			/*
+			 * The two PCIe units are accessible through
+			 * mini PCIe slot on the board.
+			 */
and here for each slot
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
+				status = "okay";
+			};
+
+			pcie@4,0 {
+				/* Port 3, Lane 0 */
+				status = "okay";
+			};
+		};
+	};
+};
then you can add my:
Acked-by: Gregory CLEMENT <redacted>

Thanks,

Gregory

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help