Re: [PATCH v5 2/3] pwm: iproc: Add support for Broadcom iproc pwm controller

On Mon, Jul 11, 2016 at 12:22:38PM +0530, Yendapally Reddy Dhananjaya Reddy wrote:

Hi Thierry,

On Fri, Jul 8, 2016 at 8:46 PM, Thierry Reding [off-list ref] wrote:

quoted

On Tue, Jul 05, 2016 at 02:00:25AM -0400, Yendapally Reddy Dhananjaya Reddy wrote:

quoted

Add support for the PWM controller present in Broadcom's iProc
family of SoCs.It has been tested on the  Northstar+ bcm958625HR board.

Signed-off-by: Yendapally Reddy Dhananjaya Reddy <redacted>
---
 drivers/pwm/Kconfig         |  10 ++
 drivers/pwm/Makefile        |   1 +
 drivers/pwm/pwm-bcm-iproc.c | 268 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 279 insertions(+)
 create mode 100644 drivers/pwm/pwm-bcm-iproc.c

I've applied this, but I had to make a couple of changes for coding
style and to squash compiler warnings. Please check the PWM tree's
for-next branch to see if it still works for you.

  Thanks. It is working fine for me. A small change is required here,
NSEC_PER_SEC
instead of USEC_PER_SEC in two places.

Ah yes, I had mixed those up when converting from literal to symbolic.
Should be fixed now.

Thanks,
Thierry