Re: [PATCH v4] wlcore: spi: add wl18xx support

"Reizer, Eyal" [off-list ref] writes:

Add support for using with both wl12xx and wl18xx.

- all wilink family needs special init command for entering wspi mode.
  extra clock cycles should be sent after the spi init command while the
  cs pin is high.
- Use inverted chip select for sending a dummy 4 bytes command that
  completes the init stage.

Signed-off-by: Eyal Reizer <redacted>
---
v1->v2:update device tree bindings configuration
v2->v3:revert from manual gpio manipulation. use inverted chip select instead
for sending the extra init cycle which, achieves the same hardware purpose.
update device tree bindings docucmentation accordingly
v3->v4: Remove redundant data form binding documentation and fix chip select
number mismatch in wl1271 example

Doesn't apply to wireless-drivers-next, please resend.

Applying: wlcore: spi: add wl18xx support
Using index info to reconstruct a base tree...
Falling back to patching base and 3-way merge...
Auto-merging drivers/net/wireless/ti/wlcore/spi.c
CONFLICT (content): Merge conflict in drivers/net/wireless/ti/wlcore/spi.c
Failed to merge in the changes.
Patch failed at 0001 wlcore: spi: add wl18xx support

-- 
Kalle Valo