[PATCH v6 4/5] usb: dwc3: add dis_del_phy_power_chg_quirk
From: William Wu <hidden>
Date: 2016-07-07 02:56:45
Also in:
linux-rockchip, lkml
Subsystem:
designware usb3 drd ip driver, open firmware and flattened device tree bindings, the rest, usb subsystem · Maintainers:
Thinh Nguyen, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds, Greg Kroah-Hartman
Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit, which specifies whether disable delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 respectively. Signed-off-by: William Wu <redacted> --- Changes in v6: - use '-' instead of '_' in dts (Rob Herring) Changes in v5: - None Changes in v4: - rebase on top of balbi testing/next, remove pdata (balbi) Changes in v3: - None Changes in v2: - None Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++ drivers/usb/dwc3/core.c | 5 +++++ drivers/usb/dwc3/core.h | 3 +++ 3 files changed, 10 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 8d7317d..1c140df 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt@@ -42,6 +42,8 @@ Optional properties: - snps,dis-u2-freeclk-exists-quirk: when set, clear the u2_freeclk_exists in GUSB2PHYCFG, specify that USB2 PHY doesn't provide a free-running PHY clock. + - snps,dis-del-phy-power-chg-quirk: when set core will change PHY power + from P0 to P1/P2/P3 without delay. - snps,phyif-utmi-quirk: when set core will set phyif UTMI+ interface. - snps,phyif-utmi: the value to configure the core to support a UTMI+ PHY with an 8- or 16-bit interface. Value 0 select 8-bit
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 94036b1..e79d6a4 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c@@ -449,6 +449,9 @@ static int dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u3_susphy_quirk) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + if (dwc->dis_del_phy_power_chg_quirk) + reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
@@ -943,6 +946,8 @@ static int dwc3_probe(struct platform_device *pdev) "snps,dis_rxdet_inp3_quirk"); dwc->dis_u2_freeclk_exists_quirk = device_property_read_bool(dev, "snps,dis-u2-freeclk-exists-quirk"); + dwc->dis_del_phy_power_chg_quirk = device_property_read_bool(dev, + "snps,dis-del-phy-power-chg-quirk"); dwc->phyif_utmi_quirk = device_property_read_bool(dev, "snps,phyif-utmi-quirk"); device_property_read_u8(dev, "snps,phyif-utmi",
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index cf6696c..55e136d 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h@@ -809,6 +809,8 @@ struct dwc3_scratchpad_array { * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists * in GUSB2PHYCFG, specify that USB2 PHY doesn't * provide a free-running PHY clock. + * @dis_del_phy_power_chg_quirk: set if we disable delay phy power + * change quirk. * @phyif_utmi_quirk: set if we enable phyif UTMI+ quirk * @phyif_utmi: UTMI+ PHY interface value * 0 - 8 bits
@@ -957,6 +959,7 @@ struct dwc3 { unsigned dis_enblslpm_quirk:1; unsigned dis_rxdet_inp3_quirk:1; unsigned dis_u2_freeclk_exists_quirk:1; + unsigned dis_del_phy_power_chg_quirk:1; unsigned phyif_utmi_quirk:1; unsigned phyif_utmi:1;
--
1.9.1