[PATCH v2 1/2] Add OV5647 device tree documentation
From: Ramiro Oliveira <hidden>
Date: 2016-06-28 11:59:58
Also in:
linux-media
Subsystem:
media input infrastructure (v4l/dvb), open firmware and flattened device tree bindings, the rest · Maintainers:
Mauro Carvalho Chehab, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Signed-off-by: Ramiro Oliveira <redacted> --- .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
new file mode 100644
index 0000000..4c91b3b
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt@@ -0,0 +1,19 @@ +Omnivision OV5647 raw image sensor +--------------------------------- + +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ovti,ov5647"; +- reg : I2C slave address of the sensor; + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Following properties are valid for the endpoint node: + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. The sensor supports only two data lanes.
--
2.8.1