Thread (15 messages) 15 messages, 4 authors, 2016-08-02
STALE3606d
Revisions (3)
  1. rfc [diff vs current]
  2. v1 current
  3. v2 [diff vs current]

[PATCH 04/12] dt-bindings: display: Update Tegra DPAUX documentation

From: Jon Hunter <jonathanh@nvidia.com>
Date: 2016-06-23 15:58:57
Also in: dri-devel, linux-gpio, linux-i2c, linux-tegra
Subsystem: drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers: David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds

Update the DPAUX compatibility string information for Tegra124, Tegra132
and Tegra210.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
---
 .../devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt     | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
index a3bd8c050c4e..275f45680892 100644
--- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
+++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
@@ -226,9 +226,9 @@ of the following host1x client modules:
   - nvidia,dpaux: phandle to a DispayPort AUX interface
 
 - dpaux: DisplayPort AUX interface
-  - compatible: For Tegra124, must contain "nvidia,tegra124-dpaux".  Otherwise,
-    must contain '"nvidia,<chip>-dpaux", "nvidia,tegra124-dpaux"', where
-    <chip> is tegra132.
+  - compatible : Should contain one of the following:
+    - "nvidia,tegra124-dpaux": for Tegra124 and Tegra132
+    - "nvidia,tegra210-dpaux": for Tegra210
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
   - clocks: Must contain an entry for each entry in clock-names.
-- 
2.1.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help