Re: [PATCH V12 2/2] mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller

On Thursday 16 June 2016 06:51 PM, Marek Vasut wrote:

On 06/16/2016 08:43 AM, Vignesh R wrote:

[...]

quoted

quoted

- I didn't find any way to find when all the data in the current 1 MiB
  block were written and you can remap another 1 MiB block in place.

I believe this constraint only applies if enahbremap bit is set in cfg
register, if not, then the entire memory map can be accessed.

And where is that memory window accessible then, at which address ?
The SoCFPGA peripherals are stuffed in some 12 MiB of the address
space, the rest is bootrom/sram/ram and the FPGA bridges, so I find
it hard to believe you can place ie. 128 MiB SPI NOR mapping somewhere
in there.

My impression is that in direct mode, the qspi will always overlay the
address 0x0 on socfpga , but that might be configurable , I'm not sure.

Ah, socfgpa provides just 1MB window to access QSPI_DATA area. So direct
mode may not be practical as it will require remapping.
But, on TI EVM, QSPI_DATA area is 64MB in size, so looks like direct
mode(when added) needs to be tied to TI specific compatible.

-- 
Regards
Vignesh
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html