[PATCH 09/19] ARM: dts: koelsch: Name serial port pfc subnodes after device names

Name the Pin Function Controller subnodes for SCIF0 and SCIF1 after
their device names, instead of after the serial port aliases.

This avoids conflicts when enabling support for more serial ports later,
either here or in a DT overlay.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 arch/arm/boot/dts/r8a7791-koelsch.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts
index 20fbc8c36a785bd3..73e5ecf036e1b968 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -332,12 +332,12 @@
 		function = "du";
 	};
 
-	scif0_pins: serial0 {
+	scif0_pins: scif0 {
 		groups = "scif0_data_d";
 		function = "scif0";
 	};
 
-	scif1_pins: serial1 {
+	scif1_pins: scif1 {
 		groups = "scif1_data_d";
 		function = "scif1";
 	};

-- 
1.9.1