[PATCH v2 08/14] ARM: dts: sun8i: Add thermal sensor node to the sun8i-h3.dtsi
From: <hidden>
Date: 2016-06-25 03:46:12
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org> This patch adds nodes for the thermal sensor driver and the THS clock to the Allwinner sun8i-h3.dtsi file. Signed-off-by: Ondrej Jirman <megous-5qf/QAjKc83QT0dZR+AlfA@public.gmane.org> --- arch/arm/boot/dts/sun8i-h3.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index b3247f4..d3c29cc 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi@@ -77,6 +77,14 @@ }; }; + thermal-zones { + cpu_thermal: cpu_thermal { + polling-delay-passive = <330>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + }; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -239,6 +247,14 @@ "bus_scr", "bus_ephy", "bus_dbg"; }; + ths_clk: clk@01c20074 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-h3-ths-clk"; + reg = <0x01c20074 0x4>; + clocks = <&osc24M>; + clock-output-names = "ths"; + }; + mmc0_clk: clk@01c20088 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk";
@@ -574,6 +590,18 @@ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; }; + ths: ths@01c25000 { + #thermal-sensor-cells = <0>; + compatible = "allwinner,sun8i-h3-ths"; + reg = <0x01c25000 0x400>, + <0x01c14234 0x4>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + resets = <&apb1_rst 8>; + reset-names = "ahb"; + clocks = <&bus_gates 72>, <&ths_clk>; + clock-names = "ahb", "ths"; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>;
--
2.9.0