Re: [PATCH v4 2/3] pwm: iproc: Add support for Broadcom iproc pwm controller
From: Brian Norris <hidden>
Date: 2016-06-22 17:31:33
Also in:
linux-arm-kernel, linux-ide, lkml
On Wed, Jun 22, 2016 at 07:29:46AM -0400, Yendapally Reddy Dhananjaya Reddy wrote:
Add support for the PWM controller present in Broadcom's iProc family of SoCs. This driver is derived from the pwm-bcm-kona driver, with changes to the register offsets and bit positions. It has been tested on the Northstar+ bcm958625HR board. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> --- drivers/pwm/Kconfig | 10 ++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-bcm-iproc.c | 327 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 338 insertions(+) create mode 100644 drivers/pwm/pwm-bcm-iproc.c
[...]
quoted hunk ↗ jump to hunk
diff --git a/drivers/pwm/pwm-bcm-iproc.c b/drivers/pwm/pwm-bcm-iproc.c new file mode 100644 index 0000000..952c457 --- /dev/null +++ b/drivers/pwm/pwm-bcm-iproc.c@@ -0,0 +1,327 @@
[...]
+static const struct pwm_ops iproc_pwm_ops = {
+ .config = iproc_pwmc_config_check,
+ .set_polarity = iproc_pwmc_set_polarity,
+ .enable = iproc_pwmc_enable,
+ .disable = iproc_pwmc_disable,
+ .owner = THIS_MODULE,
+};Have you considered trying the new apply() callback instead of config()/set_polarity()/enable()/disable()? [...] Brian -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html