Re: [PATCHv4 4/7] Documentation: dt: socfpga: Add Arria10 Ethernet binding
flat view
From: Rob Herring <robh@kernel.org>
Date: 2016-06-21 13:35:58
Also in:
linux-arm-kernel, lkml
On Mon, Jun 20, 2016 at 09:50:49AM -0500, tthayer@opensource.altera.com wrote:
quoted hunk ↗ jump to hunk
From: Thor Thayer <redacted> Add the device tree bindings needed to support the Altera Ethernet FIFO buffers on the Arria10 chip. Signed-off-by: Thor Thayer <redacted> --- v2 No Change v3 Change to common compatible string based on maintainer comments Add local IRQ values. v4 Add compatible string for parent node. --- .../bindings/arm/altera/socfpga-eccmgr.txt | 24 ++++++++++++++++++++ 1 file changed, 24 insertions(+)diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt index 15eb0df..7c714ba 100644 --- a/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-eccmgr.txt@@ -82,6 +82,14 @@ Required Properties: - interrupts : Should be single bit error interrupt, then double bit error interrupt, in this order. +Ethernet FIFO ECC +Required Properties: +- compatible : Should be "altr,socfpga-eth-mac-ecc" +- reg : Address and size for ECC block registers. +- parent : phandle to parent (altr,socfpga-stmmac) Ethernet node.
Sorry if I wasn't clear before, but I was suggesting changing 'parent' to 'altr,ethernet-mac': altr,ethernet-mac = <&gmac0>; Rob