[PATCH 01/15] drivers: net: cpsw: fix suspend when all ethX devices are down
From: Grygorii Strashko <grygorii.strashko@ti.com>
Date: 2016-06-15 11:56:30
Also in:
linux-omap, lkml, netdev
Subsystem:
networking drivers, the rest, ti ethernet switch driver (cpsw) · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds
The cpsw_suspend() could trigger L3 error and CPSW will stop functioning if System enters suspend when all ethX net-devices are down - in this case CPSW could be already suspended by PM runtime, but cpsw_suspend() will try to call soft_reset_slave() unconditionally and access CPSW registers. Hence, fix it by moving soft_reset_slave() from cpsw_suspend() to cpsw_slave_stop(). This way slave ports will be reset when CPSW is active and will be in proper state during Suspend. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- drivers/net/ethernet/ti/cpsw.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index e6bb0ec..736c77a 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c@@ -1244,6 +1244,7 @@ static void cpsw_slave_stop(struct cpsw_slave *slave, struct cpsw_priv *priv) slave->phy = NULL; cpsw_ale_control_set(priv->ale, slave_port, ALE_PORT_STATE, ALE_PORT_STATE_DISABLE); + soft_reset_slave(slave); } static int cpsw_ndo_open(struct net_device *ndev)
@@ -2558,12 +2559,10 @@ static int cpsw_suspend(struct device *dev) for (i = 0; i < priv->data.slaves; i++) { if (netif_running(priv->slaves[i].ndev)) cpsw_ndo_stop(priv->slaves[i].ndev); - soft_reset_slave(priv->slaves + i); } } else { if (netif_running(ndev)) cpsw_ndo_stop(ndev); - for_each_slave(priv, soft_reset_slave); } pm_runtime_put_sync(&pdev->dev);
--
2.8.4