Re: [PATCH v3 4/7] arm: use the new LED disk activity trigger

Started by Gregory CLEMENT on Jun 9, 2016

open the first message on its own page

Message details and related content
Hi Stephan,
 
 On jeu., juin 09 2016, Stephan Linz [off-list ref] wrote:
- dts: rename 'ide-disk' to 'disk-activity'
- platform: rename 'ide-disk' to 'disk-activity'
- defconfig: rename 'LEDS_TRIGGER_IDE_DISK' to 'LEDS_TRIGGER_DISK'

Signed-off-by: Stephan Linz <redacted>
---
I don't comment about the change itslef but if the change is OK for the
dt and led maintainer then you will have to split this patch in 3 chunks
(on for each subystem):
 arch/arm/boot/dts/am57xx-beagle-x15.dts  | 2 +-
for omap
 arch/arm/boot/dts/kirkwood-ns2lite.dts   | 2 +-
 arch/arm/boot/dts/kirkwood-topkick.dts   | 2 +-
for mvebu
 arch/arm/configs/collie_defconfig        | 2 +-
 arch/arm/configs/ixp4xx_defconfig        | 2 +-
for pxa
 arch/arm/mach-davinci/board-dm644x-evm.c | 2 +-
 arch/arm/mach-omap1/board-osk.c          | 2 +-
for omap
 arch/arm/mach-pxa/spitz.c                | 2 +-
for pxa

Thanks,

Gregory
quoted hunk
 8 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index 81d6c30..c4d04c5 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -86,7 +86,7 @@
 		led@3 {
 			label = "beagle-x15:usr3";
 			gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts
index 1f2ca60..2c661ad 100644
--- a/arch/arm/boot/dts/kirkwood-ns2lite.dts
+++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts
@@ -26,7 +26,7 @@
 		blue-sata {
 			label = "ns2:blue:sata";
 			gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts
index f5c8c0d..1e9a721 100644
--- a/arch/arm/boot/dts/kirkwood-topkick.dts
+++ b/arch/arm/boot/dts/kirkwood-topkick.dts
@@ -129,7 +129,7 @@
 		disk {
 			label = "topkick:yellow:disk";
 			gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "ide-disk";
+			linux,default-trigger = "disk-activity";
 		};
 		system2 {
 			label = "topkick:red:system";
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 6c56ad0..52dbad5 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -76,7 +76,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LOCOMO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 # CONFIG_DNOTIFY is not set
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 24636cf..cf4918a 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -180,7 +180,7 @@ CONFIG_LEDS_FSG=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_IDE_DISK=y
+CONFIG_LEDS_TRIGGER_DISK=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_ISL1208=y
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 68cc099..ab47b8e 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -288,7 +288,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS2", .active_low = 1,
 		.default_trigger = "mmc0", },
 	{ .name = "DS1", .active_low = 1,
-		.default_trigger = "ide-disk", },
+		.default_trigger = "disk-activity", },
 };
 
 static const struct gpio_led_platform_data evm_led_data = {
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 209aecb..4dfb995 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -172,7 +172,7 @@ static struct gpio_led tps_leds[] = {
 	 * Also, D9 requires non-battery power.
 	 */
 	{ .gpio = OSK_TPS_GPIO_LED_D9, .name = "d9",
-			.default_trigger = "ide-disk", },
+			.default_trigger = "disk-activity", },
 	{ .gpio = OSK_TPS_GPIO_LED_D2, .name = "d2", },
 	{ .gpio = OSK_TPS_GPIO_LED_D3, .name = "d3", .active_low = 1,
 			.default_trigger = "heartbeat", },
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index bd7cd8b..1080580 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -464,7 +464,7 @@ static struct gpio_led spitz_gpio_leds[] = {
 	},
 	{
 		.name			= "spitz:green:hddactivity",
-		.default_trigger	= "ide-disk",
+		.default_trigger	= "disk-activity",
 		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
 };
-- 
2.8.4
-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help