Re: [PATCH v2 2/5] mfd: add Ricoh RN5T567 PMIC support
From: Stefan Agner <hidden>
Date: 2016-06-08 21:51:58
Also in:
linux-amlogic, linux-arm-kernel, lkml
On 2016-06-08 13:22, Rob Herring wrote:
On Tue, Jun 07, 2016 at 06:04:26PM -0700, Stefan Agner wrote:quoted
The Ricoh RN5T567 is from the same family as the Ricoh RN5T618 is, the differences are: + DCDC4 + Slightly different output voltage/currents + 32kHz Output - ADC/Charger capabilities Reviewed-by: Marcel Ziswiler <redacted> Signed-off-by: Stefan Agner <redacted> --- Documentation/devicetree/bindings/mfd/rn5t618.txt | 19 ++++++++++------- drivers/mfd/Kconfig | 7 +++--- drivers/mfd/rn5t618.c | 26 +++++++++++++++++------ include/linux/mfd/rn5t618.h | 12 +++++++++++ 4 files changed, 46 insertions(+), 18 deletions(-)diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt index 937785a..5b493ed 100644 --- a/Documentation/devicetree/bindings/mfd/rn5t618.txt +++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt@@ -1,18 +1,21 @@ -* Ricoh RN5T618 PMIC +* Ricoh RN5T567/RN5T618 PMIC -Ricoh RN5T618 is a power management IC which integrates 3 step-down -DCDC converters, 7 low-dropout regulators, a Li-ion battery charger, -fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled -through a I2C interface. +Ricoh RN5T567/RN5T618 is a power management IC family which integrates +3 to 5 step-down DCDC converters, 7 low-dropout regulators, GPIOs andI count 4?
There is actually a third PMIC in this family RC5T619 which has 5, that is where the number comes from. But that PMIC also has 12 LDO's so the numbers are a bit a mix and much right now... If I have to amend something anyway, I will fix that. Otherwise I look at it as a preparation for the one which adds RC5T619 support :-) -- Stefan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html