[PATCH v3 09/20] pwm: sti: Rename channel => device
From: Lee Jones <hidden>
Date: 2016-06-08 09:39:13
Also in:
linux-arm-kernel, linux-pwm, lkml
Subsystem:
pwm subsystem, the rest · Maintainers:
Uwe Kleine-König, Linus Torvalds
This is to bring the terminology used in the STi PWM driver more into line with the PWM subsystem. Signed-off-by: Lee Jones <redacted> --- drivers/pwm/pwm-sti.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)
diff --git a/drivers/pwm/pwm-sti.c b/drivers/pwm/pwm-sti.c
index 92abbd5..3dae127 100644
--- a/drivers/pwm/pwm-sti.c
+++ b/drivers/pwm/pwm-sti.c@@ -21,7 +21,7 @@ #include <linux/slab.h> #include <linux/time.h> -#define STI_DS_REG(ch) (4 * (ch)) /* Channel's Duty Cycle register */ +#define STI_DS_REG(ch) (4 * (ch)) /* Device's Duty Cycle register */ #define STI_PWMCR 0x50 /* Control/Config register */ #define STI_INTEN 0x54 /* Interrupt Enable/Disable register */ #define PWM_PRESCALE_LOW_MASK 0x0f
@@ -40,7 +40,7 @@ enum { struct sti_pwm_compat_data { const struct reg_field *reg_fields; - unsigned int num_chan; + unsigned int num_devs; unsigned int max_pwm_cnt; unsigned int max_prescale; };
@@ -130,13 +130,13 @@ static int sti_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, /* Allow configuration changes if one of the * following conditions satisfy. - * 1. No channels have been configured. - * 2. Only one channel has been configured and the new request - * is for the same channel. - * 3. Only one channel has been configured and the new request is - * for a new channel and period of the new channel is same as + * 1. No devices have been configured. + * 2. Only one device has been configured and the new request + * is for the same device. + * 3. Only one device has been configured and the new request is + * for a new device and period of the new device is same as * the current configured period. - * 4. More than one channels are configured and period of the new + * 4. More than one devices are configured and period of the new * requestis the same as the current period. */ if (!ncfg ||
@@ -201,7 +201,7 @@ static int sti_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) int ret = 0; /* - * Since we have a common enable for all PWM channels, + * Since we have a common enable for all PWM devices, * do not enable if already enabled. */ mutex_lock(&pc->sti_pwm_lock);
@@ -259,11 +259,11 @@ static int sti_pwm_probe_dt(struct sti_pwm_chip *pc) const struct reg_field *reg_fields; struct device_node *np = dev->of_node; struct sti_pwm_compat_data *cdata = pc->cdata; - u32 num_chan; + u32 num_devs; - of_property_read_u32(np, "st,pwm-num-chan", &num_chan); - if (num_chan) - cdata->num_chan = num_chan; + of_property_read_u32(np, "st,pwm-num-devs", &num_devs); + if (num_devs) + cdata->num_devs = num_devs; reg_fields = cdata->reg_fields;
@@ -330,7 +330,7 @@ static int sti_pwm_probe(struct platform_device *pdev) cdata->reg_fields = &sti_pwm_regfields[0]; cdata->max_prescale = 0xff; cdata->max_pwm_cnt = 255; - cdata->num_chan = 1; + cdata->num_devs = 1; pc->cdata = cdata; pc->dev = dev;
@@ -362,7 +362,7 @@ static int sti_pwm_probe(struct platform_device *pdev) pc->chip.dev = dev; pc->chip.ops = &sti_pwm_ops; pc->chip.base = -1; - pc->chip.npwm = pc->cdata->num_chan; + pc->chip.npwm = pc->cdata->num_devs; pc->chip.can_sleep = true; ret = pwmchip_add(&pc->chip);
@@ -381,7 +381,7 @@ static int sti_pwm_remove(struct platform_device *pdev) struct sti_pwm_chip *pc = platform_get_drvdata(pdev); unsigned int i; - for (i = 0; i < pc->cdata->num_chan; i++) + for (i = 0; i < pc->cdata->num_devs; i++) pwm_disable(&pc->chip.pwms[i]); clk_unprepare(pc->clk);
--
2.8.3