Re: [PATCH v2 2/2] ARM: at91: Add DT support for Olimex SAM9-L9260 board.
From: Rob Herring <robh@kernel.org>
Date: 2016-06-02 23:19:44
Also in:
linux-arm-kernel, lkml
From: Rob Herring <robh@kernel.org>
Date: 2016-06-02 23:19:44
Also in:
linux-arm-kernel, lkml
On Tue, May 31, 2016 at 12:47:31PM +0530, Raashid Muhammed wrote:
From: Raashid Muhammed <redacted> sam9-l9260 is a low cost board designed by Olimex. More information is available at: https://www.olimex.com/Products/ARM/Atmel/SAM9-L9260/ Signed-off-by: Raashid Muhammed <redacted> Reviewed-by: Vijay Kumar B. <redacted> --- Documentation/devicetree/bindings/arm/olimex.txt | 8 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sam9_l9260.dts | 115 +++++++++++++++++++++++ 3 files changed, 122 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/at91-sam9_l9260.dts
One nit, otherwise: Acked-by: Rob Herring <robh@kernel.org>
+ spi0: spi@fffc8000 {
+ cs-gpios = <&pioC 11 0>, <0>, <0>, <0>;
+ status = "okay";
+
+ mtd_dataflash@0 {flash@0
+ compatible = "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <15000000>; + reg = <0>; + }; + };