[PATCH 4/8] ARM: dts: am4372: Add operating-points-v2 table
From: Dave Gerlach <hidden>
Date: 2016-05-18 23:36:29
Also in:
linux-arm-kernel, linux-omap, linux-pm
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add an operating-points-v2 table with all OPPs available for all silicon revisions along with necessary data for use by ti-cpufreq to selectively enable the appropriate OPPs at runtime. Information from AM437x Data Manual, SPRS851B, Revised April 2015, Table 5-2. Signed-off-by: Dave Gerlach <redacted> --- arch/arm/boot/dts/am4372.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 12fcde4d4d2e..8bf2db276128 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi@@ -44,10 +44,49 @@ clocks = <&dpll_mpu_ck>; clock-names = "cpu"; + operating-points-v2 = <&cpu0_opp_table>; + ti,syscon-efuse = <&scm_conf 0x610 0x3f 0>; + ti,syscon-rev = <&scm_conf 0x600>; + clock-latency = <300000>; /* From omap-cpufreq driver */ }; }; + cpu0_opp_table: opp_table0 { + compatible = "operating-points-v2"; + + opp50@300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <950000 931000 969000>; + opp-supported-hw = <0xFF 0x01>; + opp-suspend; + }; + + opp100@600000000 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <1100000 1078000 1122000>; + opp-supported-hw = <0xFF 0x04>; + }; + + opp120@720000000 { + opp-hz = /bits/ 64 <720000000>; + opp-microvolt = <1200000 1176000 1224000>; + opp-supported-hw = <0xFF 0x08>; + }; + + oppturbo@800000000 { + opp-hz = /bits/ 64 <800000000>; + opp-microvolt = <1260000 1234800 1285200>; + opp-supported-hw = <0xFF 0x10>; + }; + + oppnitro@1000000000 { + opp-hz = /bits/ 64 <1000000000>; + opp-microvolt = <1325000 1298500 1351500>; + opp-supported-hw = <0xFF 0x20>; + }; + }; + gic: interrupt-controller@48241000 { compatible = "arm,cortex-a9-gic"; interrupt-controller;
--
2.7.3