ARM: dts: amlogic: Enable Reset Controller on Meson8b platforms

Started by Neil Armstrong on May 30, 2016

Subsystems (1)

Maintainers (1)

DORMANTno replies

Revision v3 (2 revisions archived).

Revisions (2)
  1. v2
  2. v3 current [diff against previous]

open the first message on its own page

Message details and related content
Update DTSI file to add the reset controller node.

Signed-off-by: Neil Armstrong <redacted>
---
 arch/arm/boot/dts/meson8b.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2bfe401..fc4080d 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -46,6 +46,7 @@
 
 #include <dt-bindings/clock/meson8b-clkc.h>
 #include <dt-bindings/gpio/meson8b-gpio.h>
+#include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include "skeleton.dtsi"
 
 / {
@@ -105,6 +106,12 @@
 			#interrupt-cells = <3>;
 		};
 
+		reset: reset-controller@c1104404 {
+			compatible = "amlogic,meson8b-reset";
+			reg = <0xc1104404 0x20>;
+			#reset-cells = <1>;
+		};
+
 		wdt: watchdog@c1109900 {
 			compatible = "amlogic,meson8b-wdt";
 			reg = <0xc1109900 0x8>;
-- 
2.7.0
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help