Hi Bharat,

On 2016/5/23 23:15, Bharat Kumar Gogada wrote:

quoted

+
+	irq = platform_get_irq_byname(pdev, "pcie-sys");
+	if (irq < 0) {
+		dev_err(dev, "missing pcie_sys IRQ resource\n");
+		return -EINVAL;
+	}
+	err = devm_request_irq(dev, irq, rockchip_pcie_subsys_irq_handler,
+			       IRQF_SHARED, "pcie-sys", port);
+	if (err) {
+		dev_err(dev, "failed to request pcie subsystem irq\n");
+		return err;
+	}
+
+	port->irq = platform_get_irq_byname(pdev, "pcie-legacy");
+	if (port->irq < 0) {
+		dev_err(dev, "missing pcie_legacy IRQ resource\n");
+		return -EINVAL;
+	}
+	err = devm_request_irq(dev, port->irq,
+			       rockchip_pcie_legacy_int_handler,
+			       IRQF_SHARED,
+			       "pcie-legacy",
+			       port);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request pcie-legacy irq\n");
+		return err;
+	}
+
+	irq = platform_get_irq_byname(pdev, "pcie-client");
+	if (irq < 0) {
+		dev_err(dev, "missing pcie-client IRQ resource\n");
+		return -EINVAL;
+	}
+	err = devm_request_irq(dev, irq, rockchip_pcie_client_irq_handler,
+			       IRQF_SHARED, "pcie-client", port);
+	if (err) {
+		dev_err(dev, "failed to request pcie client irq\n");
+		return err;
+	}
+

All of the above interrupt number details are being obtained from device tree, why not move above API's to rockchip_pcie_parse_dt.

Ok, I will move these above into parse_dt function.

quoted

+	port->dev = dev;
+	err = rockchip_pcie_parse_dt(port);
+	if (err) {
+		dev_err(dev, "Parsing DT failed\n");
+		return err;
+	}
+
+	pcie_write(port, 0x6040000, PCIE_RC_CONFIG_BASE + 0x8);
+	pcie_write(port, 0x0, PCIE_CORE_CTRL_MGMT_BASE + 0x300);
+
+	pcie_write(port, (RC_REGION_0_ADDR_TRANS_L +
RC_REGION_0_PASS_BITS),
+		   PCIE_CORE_AXI_CONF_BASE);
+	pcie_write(port, RC_REGION_0_ADDR_TRANS_H,
+		   PCIE_CORE_AXI_CONF_BASE + 0x4);
+	pcie_write(port, 0x0080000a, PCIE_CORE_AXI_CONF_BASE + 0x8);
+	pcie_write(port, 0x00000000, PCIE_CORE_AXI_CONF_BASE + 0xc);

Why not move the above steps to rockchip_pcie_init_port function ?
Please use macros instead of using values.

okay, will improve them.

Thanks for comment.

-- 
Best Regards
Shawn Lin