Thread (12 messages) 12 messages, 3 authors, 2016-05-17

Re: [v5,1/7] QE: Add IC, SI and SIRAM document to device tree bindings.

From: Scott Wood <oss@buserror.net>
Date: 2016-05-16 23:22:18
Also in: linuxppc-dev, lkml

On Wed, Mar 09, 2016 at 09:21:28AM +0800, Zhao Qiang wrote:
quoted hunk ↗ jump to hunk
Add IC, SI and SIRAM document of QE to
Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt

Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
---
changes for v2
	- Add interrupt-controller in Required properties
	- delete address-cells and size-cells for qe-si and qe-siram
Changes for v3
	- Add SoC specific caompatible strings to qe-si and qe-siram
Changes for v4
	- NA 
Changes for v5
	- NA 

 .../devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt  | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
index 4f89302..7ab21cb 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpm_qe/qe.txt
@@ -69,6 +69,56 @@ Example:
 	};
      };
 
+* Interrupt Controller (IC)
+
+Required properties:
+- compatible : should be "fsl,qe-ic".
+- reg : Address range of IC register set.
+- interrupts : interrupts generated by the device.
+- interrupt-controller : this device is a interrupt controller.
+
+Example:
+
+	qeic: interrupt-controller@80 {
+		interrupt-controller;
+		compatible = "fsl,qe-ic";
+		#address-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x80 0x80>;
+		interrupts = <95 2 0 0  94 2 0 0>; //high:79 low:78
+	};
Why is the information about which interrupt is "high" and which is
"low" in a comment in the example, rather than in the definition of the
interrupts property?
+* Serial Interface Block (SI)
+
+The SI manages the routing of eight TDM lines to the QE block serial drivers
+, the MCC and the UCCs, for receive and transmit.
+
+Required properties:
+- compatible : should be "fsl,t1040-qe-si".
+- reg : Address range of SI register set.
Is t1040 the only chip that has or will ever have this?

-Scott
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help