[PATCH v3 2/5] mmc: core: add mmc-hs400-enhanced-strobe support
From: Shawn Lin <hidden>
Date: 2016-05-10 09:10:11
Also in:
linux-mmc, linux-rockchip, lkml
Subsystem:
multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest · Maintainers:
Ulf Hansson, Linus Torvalds
This patch introduce mmc-hs400-enhanced-strobe for platforms which want to enable enhanced strobe function from DT if the mmc host controller claims to support enhanced strobe. Signed-off-by: Shawn Lin <redacted> --- Changes in v3: - remove helper function and shorten cap2 to MMC_CAP2_HS400_ES - rename callback to hs400_enhanced_strobe and make it return void - add enhanced_strobe in mmc_ios and pass it to hs400_enhanced_strobe - disable host's enhanced strobe in mmc_set_initial_state - remove bus checking after switching hs400es - add new function for hs400es timing selection - fix wrong judgement of mmc_card_hs400es Changes in v2: - switch to HS400ES from Highspeed mode directly drivers/mmc/core/host.c | 2 ++ include/linux/mmc/host.h | 1 + 2 files changed, 3 insertions(+)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index e0a3ee1..45773e4 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c@@ -289,6 +289,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; if (of_property_read_bool(np, "mmc-hs400-1_2v")) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; + if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) + host->caps2 |= MMC_CAP2_HS400_ES; host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); if (host->dsr_req && (host->dsr & ~0xffff)) {
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 85800b4..2a06fb0 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h@@ -302,6 +302,7 @@ struct mmc_host { #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17) #define MMC_CAP2_NO_WRITE_PROTECT (1 << 18) /* No physical write protect pin, assume that card is always read-write */ #define MMC_CAP2_NO_SDIO (1 << 19) /* Do not send SDIO commands during initialization */ +#define MMC_CAP2_HS400_ES (1 << 20) /* Host supports enhanced strobe */ mmc_pm_flag_t pm_caps; /* supported pm features */
--
2.3.7