[PATCH v8 4/9] pwm: pwm-tiecap: Update dt binding document to use proper unit address
STALE3735d
From: Franklin S Cooper Jr <hidden>
Date: 2016-05-03 15:59:43
Also in:
linux-arm-kernel, linux-clk, linux-omap, linux-pwm, lkml
Subsystem:
open firmware and flattened device tree bindings, pwm subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Uwe Kleine-König, Linus Torvalds
Revision v8 of 3 in this series.
Revisions (3)
- v6 [diff vs current]
- v7 [diff vs current]
- v8 current
Replace unit address from 0 to the proper physical address. Also insure that the unit address matches the reg property address. Signed-off-by: Franklin S Cooper Jr <redacted> --- Documentation/devicetree/bindings/pwm/pwm-tiecap.txt | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index 788da6c..0d47354 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt@@ -16,22 +16,22 @@ Optional properties: Example: -ecap0: ecap@0 { /* ECAP on am33xx */ +ecap0: ecap@48300100 { /* ECAP on am33xx */ compatible = "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; }; -ecap0: ecap@0 { /* ECAP on am4372 */ +ecap0: ecap@48300100 { /* ECAP on am4372 */ compatible = "ti,am4372-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; reg = <0x48300100 0x80>; ti,hwmods = "ecap0"; }; -ecap0: ecap@0 { /* ECAP on da850 */ +ecap0: ecap@1f06000 { /* ECAP on da850 */ compatible = "ti,da850-ecap", "ti,am33xx-ecap"; #pwm-cells = <3>; - reg = <0x306000 0x80>; + reg = <0x1f06000 0x80>; };
--
2.7.0