Re: [PATCH v4 3/3] ARM: mvebu: Add the hardware monitor to the NSA320 device tree
From: Gregory CLEMENT <hidden>
Date: 2016-03-29 15:45:20
Also in:
linux-arm-kernel
Hi Adam, On sam., mars 05 2016, Adam Baker [off-list ref] wrote:
Add an entry for the hardware monitoring MCU Signed-off-by: Adam Baker <linux-u8Lxuz9p/S1csCcyGdaD/Q@public.gmane.org>
Applied on mvebu/dt, I only changed the tropic to "ARM: dts: kirkwood: Add the hardware monitor to the NSA320 device tree" as know requested by the arm-soc maintainer. Thanks, Gregory
quoted hunk
--- This patch is unchanged from the version Gregory CLEMENT said he would apply once the hwmon maintainers accept 2/3 --- arch/arm/boot/dts/kirkwood-nsa320.dts | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)diff --git a/arch/arm/boot/dts/kirkwood-nsa320.dts b/arch/arm/boot/dts/kirkwood-nsa320.dts index 24f686d..2a935e9 100644 --- a/arch/arm/boot/dts/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/kirkwood-nsa320.dts@@ -193,10 +193,19 @@ }; }; + hwmon { + compatible = "zyxel,nsa320-mcu"; + pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act>; + pinctrl-names = "default"; + + data-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + clk-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + act-gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + /* The following pins are currently not assigned to a driver, some of them should be configured as inputs. - pinctrl-0 = <&pmx_mcu_data &pmx_mcu_clk &pmx_mcu_act - &pmx_htp &pmx_vid_b1 + pinctrl-0 = <&pmx_htp &pmx_vid_b1 &pmx_power_resume_data &pmx_power_resume_clk>; */ };-- 2.1.4
-- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html