[PATCH v2 2/4] dt: document NXP LPC1850 ADC driver bindings
From: Joachim Eastwood <hidden>
Date: 2016-03-06 11:13:13
Also in:
linux-iio
Subsystem:
iio subsystem and drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Jonathan Cameron, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2016-03-12 · Re: [PATCH v2 2/4] dt: document NXP LPC1850 ADC driver bindings · Jonathan Cameron <hidden>
Signed-off-by: Joachim Eastwood <redacted> --- .../devicetree/bindings/iio/adc/lpc1850-adc.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
diff --git a/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt
new file mode 100644
index 000000000000..0bcae5140bc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/lpc1850-adc.txt@@ -0,0 +1,21 @@ +NXP LPC1850 ADC bindings + +Required properties: +- compatible: Should be "nxp,lpc1850-adc" +- reg: Offset and length of the register set for the ADC device +- interrupts: The interrupt number for the ADC device +- clocks: The root clock of the ADC controller +- vref-supply: The regulator supply ADC reference voltage +- resets: phandle to reset controller and line specifier + +Example: + +adc0: adc@400e3000 { + compatible = "nxp,lpc1850-adc"; + reg = <0x400e3000 0x1000>; + interrupts = <17>; + clocks = <&ccu1 CLK_APB3_ADC0>; + vref-supply = <®_vdda>; + resets = <&rgu 40>; + status = "disabled"; +};
--
1.8.0