Re: [PATCH v4 2/2] doc: dt: add documentation for lpc1850-creg-clk driver
From: Rob Herring <robh@kernel.org>
Date: 2016-03-02 17:31:07
Also in:
linux-clk
On Wed, Feb 24, 2016 at 11:04:20PM +0100, Joachim Eastwood wrote:
Add DT binding documentation for lpc1850-creg-clk driver. Signed-off-by: Joachim Eastwood <redacted> --- .../devicetree/bindings/clock/lpc1850-creg-clk.txt | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt
One typo, otherwise: Acked-by: Rob Herring <robh@kernel.org>
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt new file mode 100644 index 000000000000..4e13586d083c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/lpc1850-creg-clk.txt@@ -0,0 +1,52 @@ +* NXP LPC1850 CREG clocks + +The NXP LPC18xx/43xx CREG (Configuration Registers) block contains +control registers for two low speed clocks. One of the clocks is a +32 kHz oscillator driver with power up/down and clock gating. Next +is a fixed divider that creates a 1 kHz clock from the 32 kHz osc. + +These clocks are used by the RTC and the Event Router peripherials. +The 32 kHz can also be routed to other peripherials to enable low +power modes. + +This binding uses the common clock binding: + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: + Should be "nxp,lpc1850-creg-clk" +- #clock-cells: + Shall have value <1>. +- clocks: + Shall contain a phandle to the fixed 32 kHz crystall.
s/crystall/crystal/
+
+The creg-clk node must be a child of the creg syscon node.
+
+The following clocks are available from the clock node.
+
+Clock ID Name
+ 0 1 kHz clock
+ 1 32 kHz Oscillator
+
+Example:
+soc {
+ creg: syscon@40043000 {
+ compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd";
+ reg = <0x40043000 0x1000>;
+
+ creg_clk: clock-controller {
+ compatible = "nxp,lpc1850-creg-clk";
+ clocks = <&xtal32>;
+ #clock-cells = <1>;
+ };
+
+ ...
+ };
+
+ rtc: rtc@40046000 {
+ ...
+ clocks = <&creg_clk 0>, <&ccu1 CLK_CPU_BUS>;
+ clock-names = "rtc", "reg";
+ ...
+ };
+};
--
1.8.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html