@@ -35,6 +35,10 @@
 #define TX_LCC_SEQUENCER			0x0032
 #define TX_MIN_ACTIVATETIME			0x0033
 #define TX_PWM_G6_G7_SYNC_LENGTH		0x0034
+#define TX_REFCLKFREQ				0x00EB
+#define TX_CFGCLKFREQVAL			0x00EC
+#define	CFGEXTRATTR				0x00F0
+#define DITHERCTRL2				0x00F1
 
 /*
  * M-RX Configuration Attributes

@@ -48,8 +52,38 @@
 #define RX_ENTER_HIBERN8			0x00A7
 #define RX_BYPASS_8B10B_ENABLE			0x00A8
 #define RX_TERMINATION_FORCE_ENABLE		0x0089
+#define RX_REFCLKFREQ				0x00EB
+#define	RX_CFGCLKFREQVAL			0x00EC
+#define CFGWIDEINLN				0x00F0
+#define CFGRXCDR8				0x00BA
+#define ENARXDIRECTCFG4				0x00F2
+#define CFGRXOVR8				0x00BD
+#define RXDIRECTCTRL2				0x00C7
+#define ENARXDIRECTCFG3				0x00F3
+#define RXCALCTRL				0x00B4
+#define ENARXDIRECTCFG2				0x00F4
+#define CFGRXOVR4				0x00E9
+#define RXSQCTRL				0x00B5
+#define CFGRXOVR6				0x00BF
 
 #define is_mphy_tx_attr(attr)			(attr < RX_MODE)
+
+/*
+ * Common Block Attributes
+ */
+#define TX_GLOBALHIBERNATE			UNIPRO_CB_OFFSET(0x002B)
+#define REFCLKMODE				UNIPRO_CB_OFFSET(0x00BF)
+#define DIRECTCTRL19				UNIPRO_CB_OFFSET(0x00CD)
+#define DIRECTCTRL10				UNIPRO_CB_OFFSET(0x00E6)
+#define CDIRECTCTRL6				UNIPRO_CB_OFFSET(0x00EA)
+#define RTOBSERVESELECT				UNIPRO_CB_OFFSET(0x00F0)
+#define CBDIVFACTOR				UNIPRO_CB_OFFSET(0x00F1)
+#define CBDCOCTRL5				UNIPRO_CB_OFFSET(0x00F3)
+#define CBPRGPLL2				UNIPRO_CB_OFFSET(0x00F8)
+#define CBPRGTUNING				UNIPRO_CB_OFFSET(0x00FB)
+
+#define UNIPRO_CB_OFFSET(x)			(0x8000 | x)
+
 /*
  * PHY Adpater attributes
  */

@@ -110,6 +144,11 @@
 #define PA_STALLNOCONFIGTIME	0x15A3
 #define PA_SAVECONFIGTIME	0x15A4
 
+/*Other attributes*/
+#define VS_MPHYCFGUPDT		0xD085
+#define VS_DEBUGOMC		0xD09E
+#define VS_POWERSTATE		0xD083
+
 /* PA power modes */
 enum {
 	FAST_MODE	= 1,