[PATCH 13/17] qcom: ipq4019: add i2c node to ipq4019 SoC and DK01 device tree
From: Matthew McClintock <hidden>
Date: 2016-03-23 22:07:51
Also in:
linux-arm-kernel, linux-arm-msm, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This will allow boards to enable the I2C bus CC: Sricharan R <redacted> Signed-off-by: Matthew McClintock <redacted> --- arch/arm/boot/dts/qcom-ipq4019.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index 99e64f4..1937edf 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi@@ -25,6 +25,7 @@ aliases { spi0 = &spi_0; + i2c0 = &i2c_0; }; cpus {
@@ -126,6 +127,18 @@ status = "disabled"; }; + i2c_0: i2c@78b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x78b7000 0x6000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + acc0: clock-controller@b088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project