Hi Paul,

On 03/01/2016 07:01 PM, Paul Walmsley wrote:

quoted

quoted

2. The patch sets HWMOD_SWSUP_SIDLE for McASP1 and 2, but doesn't set it 
for McASP4-8.  Could you please confirm that this is intentional, and if 
so, why?  The descriptions of the MODULEMODE fields in SPRUHZ6 look 
identical.

I need to confirm this, but all McASP should have the same set of flags.

OK.  Looking at McASP3 data this morning, they probably shouldn't need 
HWMOD_SWSUP_SIDLE, but probably all need 

                        .modulemode   = MODULEMODE_SWCTRL,

quoted

quoted

3. Can McASP1,2,3 bus-master onto the L3?  If so, then there should be 
"dra7xx_mcasp1__l3_main_1"-style links to indicate this.

I need to check this, but I don't think McASP1,2,3 can be bus-master onto L3.

OK.  When you get back, maybe doublecheck this - it looks to me from 
SPRUHZ6 that McASP1-3 have built-in DMA controllers.

They are only targets on L3. Not sure about the built-in DMA controller

quoted

I can resend the series next week as I'm out of office this week.

That's fine.  It's most likely v4.7 material at this point.


- Paul

-- 
Péter