[PATCH 1/2] ARM: meson: Adding support to retrieve serial and SoC revision
From: Romain Perier <hidden>
Date: 2016-02-17 17:28:33
Also in:
linux-arm-kernel
Subsystem:
arm port, arm/amlogic meson soc support, the rest · Maintainers:
Russell King, Neil Armstrong, Kevin Hilman, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2016-02-18 · Re: [PATCH 1/2] ARM: meson: Adding support to retrieve serial and SoC revision · Carlo Caione <hidden>
- 2016-02-18 · Re: [PATCH 1/2] ARM: meson: Adding support to retrieve serial and SoC revision · Romain Perier <hidden>
- 2016-02-17 · Re: [PATCH 1/2] ARM: meson: Adding support to retrieve serial and SoC revision · Carlo Caione <hidden>
This path adds support to get the revision and the serial of the running SoC, on Meson8. On these plaforms, these informations can be found into CBUS registers. To do so, we instanciate a syscon register, then create a soc_device, and finally we expose everything to the system. Signed-off-by: Romain Perier <redacted> --- arch/arm/mach-meson/meson.c | 55 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+)
diff --git a/arch/arm/mach-meson/meson.c b/arch/arm/mach-meson/meson.c
index 4e23571..2816e30 100644
--- a/arch/arm/mach-meson/meson.c
+++ b/arch/arm/mach-meson/meson.c@@ -13,8 +13,16 @@ * */ +#include <linux/of_address.h> #include <linux/of_platform.h> +#include <linux/mfd/syscon.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/sys_soc.h> #include <asm/mach/arch.h> +#include <asm/system_info.h> + +#define MESON_REVISION_REG (0x45c) static const char * const meson_common_board_compat[] = { "amlogic,meson6",
@@ -23,7 +31,54 @@ static const char * const meson_common_board_compat[] = { NULL, }; +static void __init meson_init_machine(void) +{ + struct soc_device_attribute *soc_dev_attr; + struct soc_device *soc_dev; + struct regmap *hwrev; + unsigned int val; + int ret; + + hwrev = syscon_regmap_lookup_by_compatible("amlogic,meson8b-hwrev"); + if (IS_ERR(hwrev)) { + pr_err("hwrev node not found\n"); + return; + } + + soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL); + if (!soc_dev_attr) + return; + ret = regmap_read(hwrev, 0, &val); + if (ret < 0) { + pr_err("Could not get SoC id\n"); + return; + } + system_serial_high = val << 24; + + ret = regmap_read(hwrev, MESON_REVISION_REG, &val); + if (ret < 0) { + pr_err("Could not get SoC revision\n"); + return; + } + system_rev = val == 0x11111111 ? 0xA : 0xB; + + soc_dev_attr->family = "Amlogic Meson"; + soc_dev_attr->revision = kasprintf(GFP_KERNEL, "0x%x", system_rev); + soc_dev_attr->soc_id = kasprintf(GFP_KERNEL, "0x%x", system_serial_high); + + soc_dev = soc_device_register(soc_dev_attr); + if (IS_ERR(soc_dev)) { + pr_err("Could not register soc device\n"); + kfree(soc_dev_attr); + return; + } + + pr_info("Amlogic Meson SoC Rev%X (%X:%X)\n", system_rev, system_serial_high, system_rev); + of_platform_populate(NULL, of_default_bus_match_table, NULL, soc_dev); +} + DT_MACHINE_START(MESON, "Amlogic Meson platform") + .init_machine = meson_init_machine, .dt_compat = meson_common_board_compat, .l2c_aux_val = 0, .l2c_aux_mask = ~0,
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html