Re: [PATCH v2] ARM: dts: sun7i: Enable USB DRC on Olimex A20 EVB
From: Hans de Goede <hidden>
Date: 2016-02-09 09:51:03
Also in:
linux-arm-kernel
Hi, On 09-02-16 10:33, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:
From: Marcus Cooper <redacted> Enable the otg/drc usb controller on the Olimex A20 EVB. Signed-off-by: Marcus Cooper <redacted> --- Changes since v1: - Added vbus0 regulator and vbus0 detection to dts
Thanks patch looks good to me: Reviewed-by: Hans de Goede <redacted> Regards, Hans >
quoted hunk
--- arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts | 32 ++++++++++++++++++++++++++ 1 file changed, 32 insertions(+)diff --git a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts index c3c626b..23aacce 100644 --- a/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts +++ b/arch/arm/boot/dts/sun7i-a20-olimex-som-evb.dts@@ -198,6 +198,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { ahci_pwr_pin_olimex_som_evb: ahci_pwr_pin@1 { allwinner,pins = "PC3";@@ -219,6 +223,20 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + usb0_id_detect_pin: usb0_id_detect_pin@0 { + allwinner,pins = "PH4"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { + allwinner,pins = "PH5"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ®_ahci_5v {@@ -254,6 +272,10 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + ®_usb1_vbus { status = "okay"; };@@ -268,7 +290,17 @@ status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + &usbphy { + pinctrl-names = "default"; + pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>; + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH04 */ + usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH05 */ + usb0_vbus-supply = <®_usb0_vbus>; usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; status = "okay";