Re: [PATCH] ARM: dts: sun7i: Enable USB DRC on Itead Ibox

Hi,

On 08-02-16 17:56, Code Kipper wrote:

On 8 February 2016 at 17:14, Hans de Goede [off-list ref] wrote:

quoted

Hi,

On 08-02-16 16:59, codekipper-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org wrote:

quoted

From: Marcus Cooper <redacted>

Enable the otg/drc usb controller on the Itead Ibox device.

Signed-off-by: Marcus Cooper <redacted>

Same remark as with your Olimex A20 EVB board patch, please
also provide a vbus detect pin setting. If for some reason the
VBus detect is not wired up, or not working properly, please mention
this explicitly in the commit message.

Hi Hans,
I've added vbus detect and it no longer works. It's mentioned that the
Itead Ibox is similar to the Cubieboard 2 which also doesn't include
the detect. I can see now in the commit that it states "Note this
board has the otg-vbus connected directly to the 5v-dcc of the board,
so there is no vbus0 regulator, nor vbus0-det.", I will add this to
the commit message and try and dig out a schematic to confirm.

Ok, thanks for looking into this.

Regards,

Hans