[PATCH 4/4] ARM: bcm2835: Enable SDHOST by default.
From: Eric Anholt <hidden>
Date: 2016-02-26 23:12:42
Also in:
linux-arm-kernel, linux-mmc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This improves read speed on my SD card (as reported by hdparm -t) from 10.15MB/sec to 16.70MB/sec. Once we add slave DMA, we can get to 18.45MB/sec. Signed-off-by: Eric Anholt <redacted> --- arch/arm/boot/dts/bcm2835-rpi.dtsi | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index b8efd41..65d3594 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi@@ -65,10 +65,18 @@ pinctrl-names = "default"; pinctrl-0 = <&emmc_gpio48>; - status = "okay"; bus-width = <4>; }; +&sdhost { + pinctrl-names = "default"; + pinctrl-0 = <&sdhost_gpio48>; + + bus-width = <4>; + + status = "okay"; +}; + &pwm { pinctrl-names = "default"; pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
--
2.7.0