Re: [PATCH v3 1/2] devicetree: Add UCS1002 USB Port Power Controller binding

On Tue, Feb 23, 2016 at 08:27:04AM +0100, Enric Balletbo i Serra wrote:

The UCS1002-2 provides a USB port power switch for precise control of up
to 2.5 amperes continuous current.

You can add support to your board with current binding.

Example:

    ucs1002: ucs1002@57 {
             compatible = "microchip,ucs1002";
             reg = <0x57>;
    };

Signed-off-by: Enric Balletbo i Serra <redacted>
---
Changes since v2:
 - Rename microchip,current-limit to microchip,limit-microamps (Rob Herring)
Changes since v1:
 - Fix units, are microamps (Rob Herring)
 - Remove microchip,pin-ignore as is implied by absence of gpio properties (Rob
   Herring)
 - Group control gpios instead of use separate gpios. All control gpios must be
   set together (Enric Balletbo)

 .../devicetree/bindings/power/ucs1002.txt          | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/ucs1002.txt

Acked-by: Rob Herring <robh@kernel.org>