Re: [PATCH 5/6] dt-bindings: add documentation of rk3399 clock controller
From: Jianqun Xu <hidden>
Date: 2016-02-19 01:05:29
Also in:
linux-arm-kernel, linux-rockchip, lkml
Hi Heiko 在 19/02/2016 08:53, Heiko Stuebner 写道:
Am Freitag, 19. Februar 2016, 08:48:15 schrieb Jianqun Xu:quoted
Hi Rob 在 18/02/2016 22:36, Rob Herring 写道:quoted
On Wed, Feb 17, 2016 at 09:54:49AM +0800, jianqun.xu wrote:quoted
From: Xing Zheng <redacted> Add the devicetree binding for the cru on the rk3399 which quite similar structured as previous clock controllers. Signed-off-by: Xing Zheng <redacted> --- .../bindings/clock/rockchip,rk3399-cru.txt | 82 ++++++++++++++++++++++ 1 file changed, 82 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt>> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt new file mode 100644 index 0000000..07bcc6e--- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt@@ -0,0 +1,82 @@ +* Rockchip RK3399 Clock and Reset Unit[...]quoted
+Example: General Register Files + + pmugrf: syscon@ff320000 { + compatible = "rockchip,rk3399-pmugrf", "syscon";Is this documented?Since there is no documentation for rockchip grf from early SoCs, I think if we need to add a new devicetree documentation, such as Documentation/devicetree/bindings/clock/rockchip,rk3399-grf.txt ?The grf is not clock-specific, so the directory is probably not correct. I'd think bindings/arm/rockchip/grf.txt might be better or bindings/soc/rockchip/grf.txt or somewhere else. And define the properties for all per-soc GRFs in there. In any case we really should add the missing grf binding documentation (in a separate patch of course), as the grf is a pretty commonly used shared component.
Got it, I will add bindings/soc/rockchip/grf.txt in next patch Thanks !
quoted
If you agree, I will add it in next patchquoted
quoted
+ reg = <0x0 0xff320000 0x0 0x1000>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3399-grf", "syscon";ditto.quoted
+ reg = <0x0 0xff770000 0x0 0x10000>; + }; + +Example: Clock controller node: + + pmucru: pmu-clock-controller@ff750000 { + compatible = "rockchip,rk3399-pmucru"; + reg = <0x0 0xff750000 0x0 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3399-cru"; + reg = <0x0 0xff760000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff1a0000 { + compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff180000 0x0 0x100>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + }; -- 1.9.1
_______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip