Re: [PATCH v5 05/10] Input: synaptics-rmi4: Add device tree support for 2d sensors and F11
From: Rob Herring <robh@kernel.org>
Date: 2016-02-12 15:48:02
Also in:
linux-input, lkml
On Wed, Feb 10, 2016 at 02:24:34PM -0800, Andrew Duggan wrote:
2D sensors have several parameter which can be set in the platform data. This patch adds support for getting those values from devicetree. Signed-off-by: Andrew Duggan <redacted> --- .../bindings/input/rmi4/rmi_2d_sensor.txt | 56 +++++++++++ .../bindings/input/touchscreen/touchscreen.txt | 2 + drivers/input/rmi4/rmi_2d_sensor.c | 108 +++++++++++++++++++++ drivers/input/rmi4/rmi_2d_sensor.h | 3 + drivers/input/rmi4/rmi_f11.c | 7 +- 5 files changed, 175 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/input/rmi4/rmi_2d_sensor.txt
[...]
quoted hunk ↗ jump to hunk
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt index ac23caf..d6674de 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt@@ -18,6 +18,8 @@ Optional properties for Touchscreens: - touchscreen-inverted-y : Y axis is inverted (boolean) - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) Swapping is done after inverting the axis + - touchscreen-mm-x : horizontal length in mm of the touchscreen + - touchscreen-mm-y : vertical length in mm of the touchscreen
As I mentioned on v3, put the units on the end. Rob