On Tue, Feb 09, 2016 at 10:25:26PM +0530, Raveendra Padasalagi wrote:

quoted

-----Original Message-----
From: Arnd Bergmann [mailto:arnd-r2nGTMty4D4@public.gmane.org]
Sent: 09 February 2016 16:34
To: Raveendra Padasalagi
Cc: Dmitry Torokhov; Russell King; devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;

linux-arm-

quoted

kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org; linux-input-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; Rob Herring;

Pawel

quoted

Moll; Mark Rutland; Ian Campbell; Kumar Gala; Jonathan Richardson; Jon
Mason; Florian Fainelli; Ray Jui; Scott Branden;

linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org;

quoted

bcm-kernel-feedback-list-dY08KVG/lbpWk0Htik3J/w@public.gmane.org
Subject: Re: [PATCH 1/3] input: cygnus-update touchscreen dt node

document

quoted

On Tuesday 09 February 2016 14:27:55 Raveendra Padasalagi wrote:

quoted

+
+One of the below 2 property is mandatory.
+- ts_syscon: handler of syscon node defining physical base address
+  of the controller and length of memory mapped region.
+  If this property is selected please make sure MFD_SYSCON config
+  is enabled in the defconfig file.
+or
+- reg: physical base address of the controller and length of memory
+  mapped region.
+
 - clocks:  The clock provided by the SOC to driver the tsc
 - clock-name:  name for the clock
 - interrupts: The touchscreen controller's interrupt @@ -54,12 +62,16

@@ Optional properties:
 - touchscreen-inverted-y: Y axis is inverted (boolean)

 Example:
+       ts_adc_syscon: ts_adc_syscon@0x180a6000 {
+               compatible = "syscon";
+               reg = <0x180a6000 0xc30>;
+       };

        touchscreen: tsc@0x180A6000 {
                compatible = "brcm,iproc-touchscreen";
                #address-cells = <1>;
                #size-cells = <1>;
-               reg = <0x180A6000 0x40>;
+               syscon = <&ts_adc_syscon>;
                clocks = <&adc_clk>;
                clock-names = "tsc_clk";
                interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;

This doesn't seem right: For one thing, it's an incompatible binding

change which

quoted

you should try to avoid.

quoted

Worse, the syscon has a name indicating that it really has a particular

function,

quoted

but the name is completely generic (just "syscon"). Please add a

specific

quoted

compatible string identifying the device that owns the registers, and

put any

quoted

other associated properties (clocks, interrupts, ...) that are for that

device in

quoted

general rather than just the touchscreen in there.

By mistake "syscon" name is documented in "touchscreen" label above. In
the
touchscreen driver code and .dtsi file it's named and used as "ts_syscon".
Please refer https://lkml.org/lkml/2016/2/9/71 for the changes.
Let me know if this ok. I will correct the documentation in the next
patch.

quoted

Your changelog text fails to describe why you do this change in the

first place,

quoted

and why you can't do it in a backward-compatible way, so please rewrite

that

quoted

text.

Yes, I will update the change log in the next patch.

In Cygnus SOC, Touch screen controller registers are shared with ADC and
flex timer IP's.
Using readl/writel could lead to race condition. So this patch is
introduced to take care
mutually exclusive access of register's in such a case.

In the platform's where touchscreen register's are not shared normal
readl/writel
could be used.

Are there currently platforms where the registers are not shared? If we
have to use regmap to correctly update registers (and thus we need
syscon) then I wonder if we should even attempt to support direct
register access by the driver.

Based on the dt  property entry "reg" or "ts_syscon" register accesses are
handled.
if "reg" is provided normal readl/writel API's are used to access
register's else if
"ts_syscon" is provided then syscon API's are used.

If we decide that we still allow register access then please change the
driver so it instantiates its own regmap instance in this case instead
of doing checks all the time.

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html