Re: [PATCH v5 3/3] pci, pci-thunder-ecam: Add driver for ThunderX-pass1 on-chip devices

On Mon, Feb 08, 2016 at 01:39:21PM -0800, David Daney wrote:

On 02/08/2016 01:12 PM, Rob Herring wrote:

quoted

On Mon, Feb 8, 2016 at 2:47 PM, David Daney [off-list ref] wrote:

quoted

On 02/08/2016 11:56 AM, Rob Herring wrote:

quoted

On Fri, Feb 05, 2016 at 03:41:15PM -0800, David Daney wrote:

quoted

From: David Daney <redacted>

[...]

quoted

quoted

quoted

+Properties of the host controller node that differ from
+host-generic-pci.txt:
+
+- compatible     : Must be "cavium,pci-host-thunder-ecam"
+
+Example:
+
+       pci@84b0,00000000 {

Drop the comma,

OK...

quoted

and the node name should be "pcie".

Why pcie?

There are no PCIe devices or buses reachable from this type of root complex.
There are however many PCI devices.

I thought ECAM is a PCIe thing. If not, then nevermind.

The "ECAM" confusion bites again :)

Well, Enhanced Configuration Access Mechanism (ECAM) is defined  the
the PCI Express(R) base Specification, but it just defines a
standard layout of address bits to memory map config space
operations.  Since the PCI config space is a sub set of the PCIe
config space, ECAM can also be used in PCI systems.

Really, it is a bit of a gray area here as we don't have any bridges
to PCIe buses and there are multiple devices residing on each bus,
so from that point of view it cannot be PCIe.  There are, however,
devices that implement the PCI Express Capability structure, so does
that make it PCIe?  It is not clear what the specifications demand
here.

The PCI core doesn't care about the node name in the device tree.  But
it *does* care about some details of PCI/PCIe topology.  We consider
anything with a PCIe capability to be PCIe.  For example,

  - pci_cfg_space_size() thinks PCIe devices have 4K of config space

  - only_one_child() thinks a PCIe bus, i.e., a link, only has a
    single device on it

  - a PCIe device should have a PCIe Root Port or PCIe Downstream Port
    upstream from it (we did remove some of these restrictions with
    b35b1df5e6c2 ("PCI: Tolerate hierarchies with no Root Port"), but 
    it's possible we didn't get them all)

I assume your system conforms to expectations like these; I'm just
pointing them out because you mentioned buses with multiple devices on
them, which is definitely something one doesn't expect in PCIe.

Bjorn