Hi Arnd,
On mar., févr. 02 2016, Arnd Bergmann [off-list ref] wrote:
On Tuesday 02 February 2016 19:07:39 Gregory CLEMENT wrote:
quoted
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 39721ec4f415..b291f934d51b 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1606,6 +1606,28 @@ config SERIAL_STM32_CONSOLE
depends on SERIAL_STM32=y
select SERIAL_CORE_CONSOLE
+config SERIAL_MVEBU_UART
+ bool "Marvell EBU serial port support"
Could this be a loadable module?
I don't see any reason to not being able to use it as a module. But I
didn't test it because currently te serial port is the only way ro
cimmunicate with the board.
quoted
+config SERIAL_MVEBU_CONSOLE
+ bool "Console on Marvell EBU serial port"
+ depends on SERIAL_MVEBU_UART
If yes, this would become
depends on SERIAL_MVEBU_UART=y
OK, let's try to enable it.
Thanks,
Gregory
Arnd
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel