Re: [PATCH resend] ARM: dts: sun7i: Add dts file for the lamobo-r1 board

Hi,

On 27-01-16 20:47, Maxime Ripard wrote:

Hi Hans,

On Wed, Jan 27, 2016 at 07:41:45PM +0100, Hans de Goede wrote:

quoted

From: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>

The lamobo-r1 board, sometimes called the BPI-R1 but not labelled as such
on the PCB, is meant as a A20 based router board. As such the board comes
with a built-in switch chip giving it 5 gigabit ethernet boards, and it
has a large empty area on the pcb with mounting holes which will fit a
2.5 inch harddisk. To complete its networking features it has a
Realtek RTL8192CU for WiFi 802.11 b/g/n.

Signed-off-by: Jelle de Jong <jelledejong-OIcJOM8/mISwoUgIn9SVlA@public.gmane.org>
Signed-off-by: Hans de Goede <redacted>

Sorry that I missed it :/

It looks mostly fine, I just have a minor question / comment below.

quoted

+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	operating-points = <
+		/* kHz	  uV */
+		960000	1400000
+		912000	1400000
+		864000	1350000
+		720000	1250000
+		528000	1150000
+		312000	1100000
+		144000	1050000
+		>;
+};

Have you used the default OPPs and it turned out to be unstable, or is
it just some copy / paste from the FEX file?

Just copy paste from the fex file, let me know if you want a new version with
the opp-s removed.

Regards,

Hans
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html