Re: [PATCH v1 4/5] mtd: atmel_nand: Support 32-bit ECC strength

---
 .../devicetree/bindings/mtd/atmel-nand.txt         |  3 ++-
 drivers/mtd/nand/atmel_nand.c                      | 23 ++++++++++++++++++----
 drivers/mtd/nand/atmel_nand_ecc.h                  |  1 +
 3 files changed, 22 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt
index 90887b430f03..ef0db8e2a0fd 100644
--- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt

@@ -27,7 +27,8 @@ Optional properties:
 - atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware.
   Supported by AT91SAM9x5 or later SAM9 chips, and SAMA5 chips.
 - atmel,pmecc-cap : error correct capability for Programmable Multibit ECC
-  Controller. Supported values are: 2, 4, 8, 12, 24.
+  Controller. Supported values are: 2, 4, 8, 12, 24. SAMA5D2 also supports
+  32.
 - atmel,pmecc-sector-size : sector size for ECC computation. Supported values
   are: 512, 1024.
 - atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM

diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index 6fe50e2d291f..920a0a315a60 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c

@@ -474,6 +474,7 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
  *                8-bits                13-bytes                 14-bytes
  *               12-bits                20-bytes                 21-bytes
  *               24-bits                39-bytes                 42-bytes
+ *               32-bits                52-bytes                 56-bytes
  */
 static int pmecc_get_ecc_bytes(int cap, int sector_size)
 {

@@ -1022,6 +1023,9 @@ static void atmel_pmecc_core_init(struct mtd_info *mtd)
 	case 24:
 		val = PMECC_CFG_BCH_ERR24;
 		break;
+	case 32:
+		val = PMECC_CFG_BCH_ERR32;
+		break;
 	}
 
 	if (host->pmecc_sector_size == 512)

@@ -1083,6 +1087,9 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
 
 	/* If device tree doesn't specify, use NAND's minimum ECC parameters */
 	if (host->pmecc_corr_cap == 0) {
+		if (*cap > host->caps->pmecc_max_correction)
+			return -EINVAL;
+
 		/* use the most fitable ecc bits (the near bigger one ) */
 		if (*cap <= 2)
 			host->pmecc_corr_cap = 2;

@@ -1094,6 +1101,8 @@ static int pmecc_choose_ecc(struct atmel_nand_host *host,
 			host->pmecc_corr_cap = 12;
 		else if (*cap <= 24)
 			host->pmecc_corr_cap = 24;
+		else if (*cap <= 32)
+			host->pmecc_corr_cap = 32;
 		else
 			return -EINVAL;
 	}

@@ -1554,10 +1563,16 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
 	 * them from NAND ONFI parameters.
 	 */
 	if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
-		if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
-				(val != 24)) {
+		if (val > host->caps->pmecc_max_correction) {
+			dev_err(host->dev,
+				"Required ECC strength too high: %u max %u\n",
+				val, host->caps->pmecc_max_correction);
+			return -EINVAL;
+		}
+		if ((val != 2)  && (val != 4)  && (val != 8) &&
+		    (val != 12) && (val != 24) && (val != 32)) {
 			dev_err(host->dev,
-				"Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
+				"Required ECC strength not supported: %u\n",
 				val);
 			return -EINVAL;
 		}

@@ -1567,7 +1582,7 @@ static int atmel_of_init_port(struct atmel_nand_host *host,
 	if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) {
 		if ((val != 512) && (val != 1024)) {
 			dev_err(host->dev,
-				"Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
+				"Required ECC sector size not supported: %u\n",
 				val);

 			return -EINVAL;
 		}

diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
index ec964c43c932..834d694487bd 100644
--- a/drivers/mtd/nand/atmel_nand_ecc.h
+++ b/drivers/mtd/nand/atmel_nand_ecc.h

@@ -43,6 +43,7 @@
 #define		PMECC_CFG_BCH_ERR8		(2 << 0)
 #define		PMECC_CFG_BCH_ERR12		(3 << 0)
 #define		PMECC_CFG_BCH_ERR24		(4 << 0)
+#define		PMECC_CFG_BCH_ERR32		(5 << 0)
 
 #define		PMECC_CFG_SECTOR512		(0 << 4)
 #define		PMECC_CFG_SECTOR1024		(1 << 4)