Re: [PATCH v3 3/5] ARM: at91/dt: sama5d2: add adc device
From: Jonathan Cameron <hidden>
Date: 2016-01-16 11:38:34
Also in:
linux-arm-kernel, linux-iio, lkml
On 14/01/16 15:38, Ludovic Desroches wrote:
Add the ADC device, and remove the adc_op_clk which is useless since the adc sampling frequency is configured with sysfs. Signed-off-by: Ludovic Desroches <redacted>
I've now applied the driver to the togreg branch of iio.git. Should get a pull request out to Greg in about 2 weeks time and it'll probably be in linux-next a week after that. I'm assuming all the device tree changes will got through the at91 tree and arm-soc etc. Shout if you want me to take them through IIO. Thanks, Jonathan
quoted hunk ↗ jump to hunk
--- arch/arm/boot/dts/sama5d2.dtsi | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 3f750f6..46dd430 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi@@ -88,12 +88,6 @@ #clock-cells = <0>; clock-frequency = <0>; }; - - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1000000>; - }; }; ns_sram: sram@00200000 {@@ -1085,6 +1079,18 @@ status = "disabled"; }; + adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + status = "disabled"; + }; + pioA: pinctrl@fc038000 { compatible = "atmel,sama5d2-pinctrl"; reg = <0xfc038000 0x600>;