[PATCH 06/14] ARM: dts: imx6ul: disable PWMs by default
From: Lothar Waßmann <hidden>
Date: 2016-01-12 17:26:29
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Since PWMs are only useful if they are actually connected to an output pin, let users enable them explicitly in their device trees where they should also set up the pin configuration. Signed-off-by: Lothar Waßmann <redacted> --- arch/arm/boot/dts/imx6ul.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 3aba0bb..863777e 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi@@ -512,6 +512,7 @@ <&clks IMX6UL_CLK_PWM5>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm6: pwm@020f4000 {
@@ -522,6 +523,7 @@ <&clks IMX6UL_CLK_PWM6>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm7: pwm@020f8000 {
@@ -532,6 +534,7 @@ <&clks IMX6UL_CLK_PWM7>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; pwm8: pwm@020fc000 {
@@ -542,6 +545,7 @@ <&clks IMX6UL_CLK_PWM8>; clock-names = "ipg", "per"; #pwm-cells = <2>; + status = "disabled"; }; };
--
2.1.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel