[PATCH v3 4/4] mfd: arizona: Add device tree binding documentation for new clock driver
From: Charles Keepax <hidden>
Date: 2016-01-08 11:29:52
Also in:
linux-clk, lkml
Subsystem:
multifunction devices (mfd), open firmware and flattened device tree bindings, the rest · Maintainers:
Lee Jones, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Specify the device tree binding for the input clocks to Arizona devices. Signed-off-by: Charles Keepax <redacted> Acked-by: Rob Herring <robh@kernel.org> --- No changes since v2. Thanks, Charles Documentation/devicetree/bindings/mfd/arizona.txt | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt
index 18be0cb..39f76f8 100644
--- a/Documentation/devicetree/bindings/mfd/arizona.txt
+++ b/Documentation/devicetree/bindings/mfd/arizona.txt@@ -45,6 +45,13 @@ Optional properties: - wlf,reset : GPIO specifier for the GPIO controlling /RESET + - clocks: Should reference the clocks supplied on MCLK1 and MCLK2 + - clock-names: Should contains two strings: + "mclk1" for the clock supplied on MCLK1, recommended to be a high + quality audio reference clock + "mclk2" for the clock supplied on MCLK2, recommended to be an always on + 32k clock + - wlf,gpio-defaults : A list of GPIO configuration register values. Defines for the appropriate values can found in <dt-bindings/mfd/arizona.txt>. If absent, no configuration of these registers is performed. If any entry has
--
2.1.4