Amend the DT bindings to include the optional external clock on
(H)SCI(F) and some SCIFA, where this pin can serve as a clock input,
depending on board wiring.
Clarify the use of the divided functional clock as a source for the
sampling clock.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <redacted>
---
v3:
- Add Acked-by,
- Clarify the use of the divided functional clock.
---
Documentation/devicetree/bindings/serial/renesas,sci-serial.txt | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
index 7091213f02513cda..31cc0631ef7ca22d 100644
--- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
+++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt
@@ -51,6 +51,11 @@ Required properties:
- clocks: Must contain a phandle and clock-specifier pair for each entry
in clock-names.
- clock-names: Must contain "fck" for the SCIx UART functional clock.
+ Apart from the divided functional clock, there may be other possible
+ sources for the sampling clock, depending on SCIx variant.
+ On (H)SCI(F) and some SCIFA, an additional clock may be specified:
+ - "hsck" for the optional external clock input (on HSCIF),
+ - "sck" for the optional external clock input (on other variants).
Note: Each enabled SCIx UART should have an alias correctly numbered in the
"aliases" node.--
1.9.1