Hi,

On Tue, Dec 15, 2015 at 11:52:10AM -0800, Tim Bird wrote:

Add a binding for the regulator which controls the OTG chargepath switch.
The OTG switch gets its power from pm8941_5vs1, and that should be
expressed as a usb_otg_in-supply property in the DT node for the
charger driver. The regulator name is "otg-vbus".

I would like to get an acked-by from either the regulator framework
maintainers, or DT binding maintainers (or both ;)) on the binding.

-- Sebastian